Product Code Database
A sodium-vapor lamp is a gas-discharge lamp that uses sodium in an excited state to produce light at a characteristic wavelength near 589 nanometre.
Two varieties of such lamps exist: low pressure, and high pressure. Low-pressure sodium lamps are highly efficient electrical light sources, but their yellow-orange light restricts applications to outdoor lighting, such as street light, where they are widely used. High-pressure sodium lamps emit a broader spectrum of light than the low-pressure lamps, but they still have poorer color rendering than other types of lamps. Low-pressure sodium lamps give only monochromatic yellow-orange light, inhibiting color night vision.
Single ended self-starting lamps are insulated with a mica disc and contained in a borosilicate glass gas discharge tube (arc tube) with a metal cap. They include the sodium-vapor lamp that is the gas-discharge lamp used in street lighting.
Research into high-pressure sodium lamps occurred in both the United Kingdom and the United States. Increasing the pressure of the sodium vapor broadened the sodium emission spectrum so that the light produced had more energy emitted at wavelengths above and below the 589 nm region. The quartz material used in mercury discharge lamps was corroded by high pressure sodium vapor. A laboratory demonstration of a high pressure lamp was carried out in 1959. The development by General Electric of a sintered aluminum oxide material (with magnesium oxide added to improve light transmission) was an important step in construction of a commercial lamp. The material was available in the form of tubing by 1962, but additional techniques were required to seal the tubes and add the necessary electrodes—the material could not be fused like quartz. The end caps of the arc tube would get as hot as in operation, then cool to room temperature when the lamp was turned off, so the electrode terminations and arc tube seal had to tolerate repeated temperature cycles. This problem was solved by Michael ArendashUSA patent US3737717A, Arendash, Michael, "High intensity lamp containing thermal shorting fuse", published 1972-03-13, issued 1973-06-05, assigned to General Electric Co. at the GE Nela Park plant. The first commercial high-pressure sodium lamps were available in 1965 from companies in the United States, the United Kingdom, and the Netherlands; at introduction a 400 watt lamp would produce around 100 lumens per watt.Raymond Kane, Heinz Sell, Revolution in Lamps: A Chronicle of 50 Years of Progress, Second Edition, Fairmont Press, 2001. pp. 238–241.J. J. de Groot, J. A. J. M. van Vliet, The High-Pressure Sodium Lamp, Macmillan International Higher Education, 1986, . pp. 13-17.
Single-crystal artificial sapphire tubes were also manufactured and used for HPS lamps in the early 1970s, with a slight improvement in efficacy, but production costs were higher than for polycrystalline alumina tubes.
LPS lamps have an outer glass vacuum envelope around the inner discharge tube for thermal insulation, which improves their efficiency. Earlier LPS lamps had a detachable dewar jacket (SO lamps). Lamps with a permanent vacuum envelope (SOI lamps) were developed to improve thermal insulation. Further improvement was attained by coating the glass envelope with an infrared reflecting layer of indium tin oxide, resulting in SOX lamps, the current, standard type of Low pressure sodium lamps.
Following the development of the Philips Mini-SOX 18W (which became the smallest size of Low pressure sodium lamps and later incorporated into the SOX-E range), some of the design features that contributed to its high efficacy were applied to the existing high power SOX lamps. The result was the SOX-E (Economy) range, that was more energy-efficient and operated on less current than before. They are easily distinguished by their black Bayonet mount caps instead of red on standard SOX lamps. Lamp power was significantly reduced compared to that of the traditional SOX range, lowering discharge current density and increasing luminous efficacy. This was achieved through improved thermal insulation and a modified infrared-reflective coating.
LPS lamps are among the most efficient electrical light sources when measured in photopic lighting conditions, producing above 100 and up to 206 lm/watt. This high efficiency is partly due to the light emitted being at a wavelength near the peak sensitivity of the human eye. They are used mainly for outdoor lighting (such as and security lighting) where faithful color rendition is not important.
LPS lamps are similar to fluorescent lamps in that they are a low-intensity light source with a linear lamp shape. They do not exhibit a bright arc as do high-intensity discharge (HID) lamps; they emit a softer luminous glow, resulting in less glare. Unlike HID lamps, during a voltage dip low-pressure sodium lamps return to full brightness rapidly. LPS lamps are available with Electrical power ratings from 10 to 180 W; longer lamp lengths can, however, suffer design and engineering problems.
Modern LPS lamps have a service life of about 18,000 hours and do not decline in lumen output with age, though they do increase in energy consumption by about 10% towards end of life. This property contrasts with mercury vapor HID lamps, which become dimmer towards the end of life to the point of being ineffective, while consuming undiminished electrical power.
In 2017 Philips Lighting, a major manufacturer of LPS lamps, announced they were discontinuing production of the lamps due to falling demand. Initially, production was due to be phased out in the course of 2020, but this date was brought forward and the last lamps were produced at the Hamilton, Scotland factory on December31, 2019.
LPS lamps, ballasts, ignitors and sockets are still being manufactured and sold by Qian Shun Lighting Company in Taizhou, China.
The yellow color of low-pressure sodium lamps leads to the least visual sky glow, due primarily to the Purkinje shift of dark-adapted human vision, causing the eye to be relatively insensitive to the yellow light scattered at low luminance levels in the clear atmosphere.
High-pressure sodium lamps are quite efficient—about 100 lumens per watt, when measured for Photopic vision lighting conditions. Some higher-power lamps (e.g. 600 watt) have efficacies of about 150 lumens per watt.
Since the high-pressure sodium arc is extremely chemically reactive, the arc tube is typically made of translucent aluminum oxide. This construction led the General Electric Company to use the tradename "Lucalox" for its line of high-pressure sodium lamps.
Xenon at a low pressure is used as a "starter gas" in the HPS lamp. It has the lowest thermal conductivity and lowest ionization potential of all the stable noble gases. As a noble gas, it does not interfere with the chemical reactions occurring in the operating lamp. The low thermal conductivity minimizes thermal losses in the lamp while in the operating state, and the low ionization potential causes the breakdown voltage of the gas to be relatively low in the cold state, which allows the lamp to be easily started.
The first and last states are stable, because the lamp resistance is weakly related to the voltage, but the second state is unstable. Any anomalous increase in current will cause an increase in power, causing an increase in amalgam temperature, which will cause a decrease in resistance, which will cause a further increase in current. This will create a runaway effect, and the lamp will jump to the high-current state (#3). Because actual lamps are not designed to handle this much power, this would result in catastrophic failure. Similarly, an anomalous drop in current will drive the lamp to extinction. It is the second state that is the desired operating state of the lamp, because a slow loss of the amalgam over time from a reservoir will have less effect on the characteristics of the lamp than a fully evaporated amalgam. The result is an average lamp life in excess of 20,000 hours.
In practical use, the lamp is powered by an AC voltage source in series with an inductive ballast in order to supply a nearly constant current to the lamp, rather than a constant voltage, thus assuring stable operation. The ballast is usually inductive rather than simply being resistive to minimize energy waste from resistance losses. Because the lamp effectively extinguishes at each zero-current point in the AC cycle, the inductive ballast assists in the reignition by providing a voltage spike at the zero-current point.
The light from the lamp consists of spectral line of mercury and sodium, but is dominated by the sodium D-line emission. This line is extremely pressure (resonance) broadened and is also self-reversed because of absorption in the cooler outer layers of the arc, giving the lamp its improved color rendering characteristics. In addition, the red wing of the D-line emission is further pressure broadened by the Van der Waals forces from the mercury atoms in the arc.
Unsaturated high-pressure sodium lamps exhibit a different failure at the end of life. Since all the sodium-amalgam is vaporized, there is no voltage rise, so these lamps don't cycle at their end of life. When all the sodium is consumed, the lamp operates with a greenish color of the mercury vapor discharge.
LPS lamp failure does not result in cycling. The lamp will not strike or will maintain the dull red glow of the start-up phase. In another failure mode, a tiny puncture of the arc tube leaks some of the sodium vapor into the outer vacuum bulb. The sodium condenses and creates a mirror on the outer glass, partially obscuring the arc tube. The lamp often continues operating normally, but much of the light generated is obscured by the sodium coating, providing no illumination.
Low-pressure sodium
Low-pressure sodium (LPS) lamps have a borosilicate glass gas discharge tube containing solid sodium and a small amount of neon and argon gas in a Penning mixture to start the gas discharge. The discharge tube may be linear (SLI lamp) or U-shaped. When the lamp is first started, it emits a dim red/pink light (from the neon and argon) to warm the sodium metal; within a few minutes as the sodium metal vaporization, the emission becomes the common bright yellow. These lamps produce a virtually monochromatic light averaging a 589.3 nanometre wavelength (actually two dominant spectral lines very close together at 589.0 and 589.6 nm). The colors of objects illuminated by only this narrow bandwidth are difficult to distinguish.
Light pollution considerations
For locations where light pollution is a consideration, such as near astronomical observatories or sea turtle nesting beaches, low-pressure sodium is preferred (as formerly in San Jose, California and Flagstaff, Arizona). Such lamps emit light on just two dominant spectral lines (with other much weaker lines), and therefore have the least spectral interference with astronomical observation.
Film special effects
Sodium vapor process (occasionally referred to as yellowscreen) is a film technique that relies on narrowband characteristics of LPS lamp. Color negative film typically is insensitive to the yellow light of an LPS lamp, but special black-and-white film is able to record it. Using a special camera, scenes are recorded on two spools simultaneously: one with actors (or other foreground objects), and another that becomes a mask for later combination with a different background. This technique originally yielded results superior to Chroma key technology, and was used in years 1956 to 1990, mostly by Disney Studios. Notable examples of films using this technique include Alfred Hitchcock's The Birds and the Disney films Mary Poppins and Bedknobs and Broomsticks. Later advancements in blue- and green-screen techniques and computer imagery closed that gap, leaving SVP economically impractical.
Electrical parameters
SOX-E 18 18 57 0.35 26 27 69 0.45 36 35 120 0.35 66 65 123 0.62 91 90 173 0.62 131 127 250 0.62 SOX 35 37 70 0.60 55 56 109 0.59 90 91 112 0.94 135 135 164 0.95 180 185 240 0.91
High-pressure sodium
High-pressure sodium (HPS) lamps have been widely used in industrial lighting, especially in large manufacturing facilities, and are commonly used as Grow light. They contain mercury. They have also been widely used for outdoor area lighting, such as on roadways, parking lots, and security areas. Understanding the change in human color vision sensitivity from photopic to mesopic and scotopic is essential for proper planning when designing lighting for roadways. (Comparison is with HPS and MH lamps)
"White" high pressure sodium lamp
A variation of the high-pressure sodium introduced in 1986, the White HPS has a higher pressure than the typical HPS lamp, producing a color temperature of around 2500 kelvins with a color rendering index (CRI) of about 85, greatly resembling the color of an incandescent light. These lamps are often used indoors in cafes and restaurants for aesthetic effect. However, white HPS lamps have higher cost, and lower lumen efficacy, and so they cannot compete with HPS.
Electrical parameters of white sodium lamps
35 33.3 98 0.47 50 55.5 90 0.78 100 97 98 1.31
Theory of operation
An sodium amalgam and mercury lies at the coolest part of the lamp and provides the sodium and mercury vapor that is needed to draw an arc. The temperature of the amalgam is determined to a great extent by lamp power. The higher the lamp power, the higher will be the amalgam temperature. The higher the temperature of the amalgam, the higher will be the mercury and sodium vapor pressures in the lamp and the higher will be the terminal voltage. As the temperature rises, the constant current and increasing voltage consumes increasing energy until the operating level of power is reached. For a given voltage, there are generally three modes of operation:
Electrical parameters for European and British high-pressure sodium lamps
SON 35 35 85V±15 0.53 50 50 85V±15 0.76 70 70 90V±15 0.98 100 100 100±15 1.20 150 150 100±15 1.80 250 250 100±15 3.00 400 392 100±15 4.60 600 605 110±15 6.10 SON-T 1000 960 100±15 10.60 SON-E 1000 1000 110±15 10.60
Electrical parameters for American high-pressure sodium lamps
S76 35 35 52 0.83 S68 50 50 52 1.18 S62 70 70 52 1.60 S54 100 100.4 55 2.10 S55 150 150 55 3.20 S56 150 150 100 1.80 S66 200 200 100 2.40 S50 250 250 100 3.00 S67 310 310 100 3.60 S51 400 400 100 4.60 S145 430 430 116 4.25 S106 600 600 110 6.20 S111 750 750 120 7.00 S52 1000 1000 250 4.70
End of life
At the end of life, saturated high-pressure sodium (HPS) lamps may begin cycling on and off. Material sputtered off the electrodes darkens the arc tube, so it absorbs more radiated light and operates hotter. Increased temperature causes increased gas pressure, which increases arc tube voltage drop. Eventually the electrical ballast no longer provides sufficient voltage to maintain an Arc discharge As the lamp heats, the arc fails, and the lamp goes out. With the arc extinguished, the lamp cools down again, the gas pressure in the arc tube is reduced, and the electrical ballast can once again cause the arc to strike. The effect of this is that the lamp glows for a while and then goes out, typically starting at a pure or bluish white and then moving to a red-orange before going out.
Some ignitor designs give up attempting to start the lamp after a few cycles to protect ballast and ignitor from deterioration due to multiple high voltage pulses. If power is removed and reapplied, the ballast will make a new series of startup attempts.
Decline and gradual phase out to LED
Since the mid 2010s, many city authorities around the world have began to phase out the sodium vapor lamp by switching to Light emitting diode steet lighting, citing environmental incentives and savings on energy consumption (since LED'
/ref> Some munincipalities such as Titusville Florida and the nearby Kennedy Space Center have installed LED street lighting that matches the warm orange/amber sodium lamp counterpart.
Gallery
See also
Sources
External links
|
|
